View 532BA000210BG_6650089.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rev. 1.0 7/06 copyright ? 2006 by silicon laboratories si532 si532 d ual f requency c rystal o scillator (xo) (10 mh z to 1.4 gh z ) features applications description the si532 dual frequency xo utilizes silicon laboratories? advanced dspll ? circuitry to provide a low jitter clock at high frequencies. the si532 is available with any-rate output frequency from 10 to 945 mhz and select frequencies to 1400 mhz. unlike a traditional xo where a different crystal is required for each output frequency, the si532 uses one fixed crystal frequency to provide a wide range of output frequencies. this ic based approach allows the crystal resonator to provide exceptional frequency stability and reliability. in addition, dspll clock synthesis provides superior supply noise rejection, simplifying the task of generating low jitter clocks in noisy environments typically found in communication systems. the si532 ic based xo is factory configurable for a wide variety of user specifications including frequency, supply voltage, output format, and temperature stability. specific configurations are factory programmed at time of shipment, thereby eliminating long lead times associated with custom oscillators. functional block diagram available with any-rate output frequencies from 10 mhz to 945 mhz and select frequencies to 1.4 ghz two selectable output frequencies 3rd generation dspll ? with superior jitter performance 3x better frequency stability than saw-based oscillators internal fixed crystal frequency ensures high reliability and low aging available cmos, lvpecl, lvds, and cml outputs 3.3, 2.5, and 1.8 v supply options industry-standard 5 x 7 mm package and pinout pb-free/rohs-compliant sonet/sdh networking sd/hd video test and measurement clock and data recovery fpga/asic clock generation fixed frequency xo any-rate 10?1400 mhz dspll ? clock synthesis v dd clk+ clk? fs gnd oe ordering information: see page 7. pin assignments: see page 6. (top view) si5602 1 2 3 6 5 4 gnd oe v dd clk+ clk? fs 1 2 3 6 5 4 gnd oe v dd clk nc fs (lvds/lvpecl/cml) (cmos)
si532 2 rev. 1.0 1. electrical specifications table 1. recommended operating conditions parameter symbol test condition min typ max units supply voltage 1 v dd 3.3 v option 2.97 3.3 3.63 v 2.5 v option 2.25 2.5 2.75 1.8 v option 1.71 1.8 1.89 supply current i dd output enabled lvpecl cml lvds cmos ? ? ? ? 111 99 90 81 121 108 98 88 ma tristate mode ? 60 70 output enable (oe) and frequency select (fs) 2 v ih 0.75 x v dd ?? v v il ??0.5 operating temperature range 3 t a ?40 ? 85 oc notes: 1. selectable parameter specified by part number. see section 3. "ordering information" on page 7 for further details. 2. oe and fs pins include a 17 k ? pullup resistor to v dd . pulling oe to ground causes outputs to tristate. 3. if the device is powered up below ?20 oc and the ambien t temperature rises by approximately 105 oc during normal operation, the device will perform a one-time recalibration. the output is squelched for approximately 2?3 ms during this recalibration. table 2. clk output frequency characteristics parameter symbol test condition min typ max units nominal frequency 1,2 f o lvpecl/lvds/cml 10 ? 945 mhz cmos 10 ? 160 initial accuracy f i measured at +25 c at time of shipping ?1.5?ppm temperature stability 1,3 ? f/f o ?20 ?50 ? ? +20 +50 ppm aging f a frequency drift over projected 15 year life ??10ppm powerup time 4 t osc ??10ms settling time after fs change t frq ??10ms notes: 1. see section 3. "ordering information" on page 7 for further details. 2. specified at time of order by part number. also available in frequencies from 970 to 1134 mhz and 1213 to 1417 mhz. 3. selectable parameter specified by part number. 4. time from powerup or tristate mode to f o .
si532 rev. 1.0 3 table 3. clk output levels and symmetry parameter symbol test condition min typ max units lvpecl output option 1 v o mid-level v dd ? 1.42 ? v dd ? 1.25 v v od swing (diff) 1.1 ? 1.9 v pp v se swing (single-ended) 0.5 ? 0.93 v pp lvds output option 2 v o mid-level 1.125 1.20 1.275 v v od swing (diff) 0.32 0.40 0.50 v pp cml output option 2 v o mid-level ? v dd ? 0.75 ? v v od swing (diff) 0.70 0.95 1.20 v pp cmos output option 3 v oh i oh =32ma 0.8 x v dd ? v dd v v ol i ol =32ma ? ? 0.4 rise/fall time (20/80%) t r, t f lvpecl/lvds/cml ? ? 350 ps cmos with cl = 15 pf ? 1 ? ns symmetry (duty cycle) sym lvpecl: v dd ? 1.3 v (diff) lvds: 1.25 v (diff) cmos: v dd /2 45 ? 55 % notes: 1. 50 ? to v dd ? 2.0 v. 2. r term = 100 ? (differential). 3. c l = 15 pf table 4. clk output phase jitter parameter symbol test condition min typ max units phase jitter (rms)* for f out > 500 mhz j 12 khz to 20 mhz (oc-48) ? 0.40 0.50 ps 50 khz to 80 mhz (oc-192) lvpecl cml lvds ? ? ? 0.30 0.35 0.40 0.40 0.47 0.49 ps phase jitter (rms)* for f out of 125 to 500 mhz j 12 khz to 20 mhz (oc-48) lvpecl cml lvds ? ? ? 0.40 0.45 0.45 0.50 0.50 0.52 ps *note: differential modes: lvpecl/ lvds/cml. refer to an25 6 for further information.
si532 4 rev. 1.0 table 5. clk output period jitter parameter symbol test condition min typ max units period jitter* for f out < 160 mhz j per rms ? 1 ? ps peak-to-peak ? 5 ? *note: any output mode, incl uding cmos, lvpecl, lvds, cml. n = 1000 cycles . refer to an279 fo r further information. table 6. clk output phase noise (typical) configuration f c output 81.25 mhz lvds 312.5 mhz lvpecl 1066 mhz lvpecl units offset frequency (f) 100 hz 1khz 10 khz 100 khz 1mhz 10 mhz 100 mhz l (f) dbc/hz ?110 ?127 ?134 ?136 ?143 ?147 n/a ?100 ?115 ?119 ?123 ?135 ?144 ?147 ?87 ?102 ?107 ?111 ?121 ?135 ?142 table 7. absolute maximum ratings 1 parameter symbol rating units supply voltage v dd ?0.5 to +3.8 volts input voltage (any input pin) v i ?0.5 to v dd + 0.3 volts storage temperature t s ?55 to +125 oc esd sensitivity (hbm, per jesd22-a114) esd >2500 volts soldering temperature (pb-free profile) 2 t peak 260 oc soldering temperature time @ t peak (pb-free profile) 2 t p 10 seconds notes: 1. stresses beyond those listed in absolute maximum ratings may cause permanent damage to the device. functional operation or specification compliance is not implied at these conditions. 2. refer to si5xx packaging faq available for download at www.silabs.com/vcxo for further information, including soldering profiles.
si532 rev. 1.0 5 table 8. environmental compliance the si532 meets the following qualification test requirements. parameter conditions/ test method mechanical shock mil-std-883f, method 2002.3 b mechanical vibration mil-std-883f, method 2007.3 a solderability mil-std-8 83f, method 203.8 gross & fine leak mil-std-883f, method 1014.7 resistance to solvents mil-std-883f, method 2016
si532 6 rev. 1.0 2. pin descriptions table 9. pin descriptions pin symbol lvds/lvpecl/cml function cmos function 1fs* frequency select 0 = first frequency selected 1 = second frequency selected frequency select 0 = first frequency selected 1 = second frequency selected 2oe* output enable 0 = clock output disabled (outputs tristated) 1 = clock output enabled output enable 0 = clock output disabled (outputs tristated) 1 = clock output enabled 3 gnd electrical and case ground electrical and case ground 4 clk+ oscillator output oscillator output 5 clk? complementary output no connection 6v dd power supply voltage power supply voltage *note: fs and oe include a 17 k ? pullup resistor to v dd . see section 3. ?ordering information? for details on frequency value ordering. 1 2 3 6 5 4 gnd oe v dd clk nc fs (top view) 1 2 3 6 5 4 gnd oe v dd clk+ clk? fs lvds/lvpecl/cml cmos
si532 rev. 1.0 7 3. ordering information the si532 xo was designed to support a variety of options including fr equency, temperatur e stability, output format, and v dd . specific device configurations are programmed into the si532 at time of shipment. configurations can be specified using the part num ber configuration chart below. silicon laboratories provi des a web browser- based part number configur ation utility to simplify th is process. refer to www.silabs.com/vcxopartnumber to access this tool and for further ordering instructions. the si532 is supplied in an industry-standard, rohs compliant, 6-pad, 5 x 7 mm package. figure 1. part number convention example part number: 532ab000108bgr is a 5 x 7 mm dual xo in a 6 pad package. since the six digit code (000108) is > 000100, f0 is 644.53125 mhz (lower frequency) and f1 is 693.48299 (higher frequency), with a 3.3 v supply, lvpecl output, and output enable active high polarity. temperature stability is specified as 20 ppm. the part is specified for a ?40 to +85 c ambient temperature range operation and is shipped in tape and reel format. r = tape & reel blank = trays operating temp range (c) g ?40 to +85 c device revision letter 2 nd option code code temperature stability (ppm, max, ) a50 b20 532 dual xo product family 6-digit frequency designator code two unique frequencies can be specified within the following bands of frequencies: 10 to 945 mhz, 970 to 1134 mhz, and 1213 to 1417 mhz. a six digit code will be assi gned for the specified combination of frequencies. codes > 000100 refer to dual xos programmed with the lower frequency value selected when fs = 0, and the higher value when fs = 1. six digit codes < 000100 refer to dual xos programmed with the higher frequency value selected when fs = 0, and the lower value when fs = 1. 532 x x xxxxxx b g r 1 st option code v dd output format output enable polarity a 3.3 lvpecl high b 3.3 lvds high c 3.3 cmos high d3.3cml high e 2.5 lvpecl high f 2.5 lvds high g 2.5 cmos high h2.5cml high j 1.8 cmos high k1.8cml high m 3.3 lvpecl low n 3.3 lvds low p3.3cmos low q3.3cml low r 2.5 lvpecl low s 2.5 lvds low t2.5cmos low u2.5cml low v1.8cmos low w1.8cml low note : cmos available to 160 mhz.
si532 8 rev. 1.0 4. outline diagram and suggested pad layout figure 2 illustrates the package details for the si532. table 10 lists the val ues for the dimensions shown in the illustration. figure 2. si532 outline diagram table 10. package diagram dimensions (mm) dimension min nom max a 1.45 1.65 1.85 b1.21.41.6 c0.60 typ d 7.00 bsc d1 6.10 6.2 6.30 e 2.54 bsc e 5.00 bsc e1 4.30 4.40 4.50 l 1.07 1.27 1.47 s 1.815 bsc r 0.7 ref aaa ? ? 0.15 bbb ? ? 0.15 ccc ? ? 0.10 ddd ? ? 0.10
si532 rev. 1.0 9 5. 6-pin pcb land pattern figure 3 illustrates the 6-pin pcb land pa ttern for the si532. table 11 lists the values for the dimensions shown in the illustration. figure 3. si532 pcb land pattern table 11. pcb land pattern dimensions (mm) dimension min max d2 5.08 ref e 2.54 bsc e2 4.15 ref gd 0.84 ? ge 2.00 ? vd 8.20 ref ve 7.30 ref x1.70 typ y2.15 ref zd ? 6.78 ze ? 6.30 notes: 1. dimensioning and tolerancing per the ansi y14.5m-1994 specification. 2. land pattern design based on ipc-7351 guidelines. 3. all dimensions shown are at ma ximum material condition (mmc). 4. controlling dimension is in millimeters (mm).
si532 10 rev. 1.0 d ocument c hange l ist revision 0.4 to revision 0.5 updated table 1, ?recommended operating conditions,? on page 2. added maximum supply current specifications. specified relationship between temperature at startup and operation temperature. updated table 4, ?clk output phase jitter,? on page 3 to include maximum rms jitter generation specifications and updated typical rms jitter specifications. added output enable active polarity as an option in figure 1, ?part number convention,? on page 7. revision 0.5 to revision 1.0 updated note 3 in table 1, ?recommended operating conditions,? on page 2. updated figure 1, ?part number convention,? on page 7.
si532 rev. 1.0 11 n otes :
si532 12 rev. 1.0 c ontact i nformation silicon laboratories inc. 4635 boston lane austin, tx 78735 tel: 1+(512) 416-8500 fax: 1+(512) 416-9669 toll free: 1+(877) 444-3032 email: vcxoinfo@silabs.com internet: www.silabs.com silicon laboratories, silicon labs, and dspll are trademarks of silicon laboratories inc. other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders. the information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. silicon laboratories assumes no responsibility for errors and omissions, and disclaims responsib ility for any consequences resu lting from the use of information included herein. a dditionally, silicon laboratorie s assumes no responsibility for the functioning of und escribed features or parameters. silicon laboratories reserves the right to make changes without further notice . silicon laboratories makes no wa rranty, rep- resentation or guarantee regarding the suitability of its products for any particular purpose, nor does silicon laboratories as sume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any an d all liability, including wi thout limitation conse- quential or incidental damages. silicon laborat ories products are not designed, intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of the silicon laboratories product could create a s ituation where per- sonal injury or death may occur. should buyer purchase or us e silicon laboratories products for any such unintended or unauthor ized ap- plication, buyer shall indemnify and hold silicon laboratories harmless against all claims and damages.
xo/vcxo part number selector help oscillator part number information part number: 532aa000028bg oscillator specification summary 4/19/2007 7:21:13 am model number: si532 (dual xo) output frequency (mhz): fs=0: 48.000400 fs=1: 27.000000 (frequencies are sorted in desce nding order, since this is a multi-frequency part number code < 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532aa000028bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532aa000035bg oscillator specification summary 4/19/2007 7:22:09 am model number: si532 (dual xo) output frequency (mhz): fs=0: 780.00000 fs=1: 200.00000 (frequencies are sorted in desce nding order, since this is a multi-frequency part number code < 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532aa000035bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532aa000104bg oscillator specification summary 4/19/2007 7:20:45 am model number: si532 (dual xo) output frequency (mhz): fs=0: 155.52000 fs=1: 156.25000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532aa000104bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532aa000165bg oscillator specification summary 4/19/2007 7:21:38 am model number: si532 (dual xo) output frequency (mhz): fs=0: 580.00000 fs=1: 671.40000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532aa000165bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532aa000184bg oscillator specification summary 4/19/2007 7:23:01 am model number: si532 (dual xo) output frequency (mhz): fs=0: 80.700000 fs=1: 91.400000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532aa000184bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532aa000187bg oscillator specification summary 4/19/2007 7:22:35 am model number: si532 (dual xo) output frequency (mhz): fs=0: 752.50000 fs=1: 825.00000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532aa000187bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532aa000208bg oscillator specification summary 4/19/2007 7:20:13 am model number: si532 (dual xo) output frequency (mhz): fs=0: 62.500000 fs=1: 125.00000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532aa000208bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000005bg oscillator specification summary 4/19/2007 7:17:32 am model number: si532 (dual xo) output frequency (mhz): fs=0: 161.13281 fs=1: 155.52000 (frequencies are sorted in desce nding order, since this is a multi-frequency part number code < 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000005bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000118bg oscillator specification summary 4/19/2007 7:19:45 am model number: si532 (dual xo) output frequency (mhz): fs=0: 74.175824 fs=1: 74.250000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000118bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000123bg oscillator specification summary 4/19/2007 7:18:01 am model number: si532 (dual xo) output frequency (mhz): fs=0: 155.52000 fs=1: 166.62857 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000123bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000155bg oscillator specification summary 4/19/2007 7:16:38 am model number: si532 (dual xo) output frequency (mhz): fs=0: 720.00000 fs=1: 1000.0000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000155bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000165bg oscillator specification summary 4/19/2007 7:19:17 am model number: si532 (dual xo) output frequency (mhz): fs=0: 580.00000 fs=1: 671.40000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000165bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000166bg oscillator specification summary 4/19/2007 7:18:47 am model number: si532 (dual xo) output frequency (mhz): fs=0: 164.35547 fs=1: 176.83816 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000166bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000167bg oscillator specification summary 4/19/2007 7:18:23 am model number: si532 (dual xo) output frequency (mhz): fs=0: 167.33165 fs=1: 173.37075 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000167bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532ab000190bg oscillator specification summary 4/19/2007 7:17:08 am model number: si532 (dual xo) output frequency (mhz): fs=0: 132.81250 fs=1: 156.25000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvpecl vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532ab000190bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532BA000210BG oscillator specification summary 4/19/2007 7:14:51 am model number: si532 (dual xo) output frequency (mhz): fs=0: 100.00000 fs=1: 200.00000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvds vdd: 3.3v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532BA000210BG.mht
xo/vcxo part number selector help oscillator part number information part number: 532fa000212bg oscillator specification summary 4/19/2007 7:14:09 am model number: si532 (dual xo) output frequency (mhz): fs=0: 250.00000 fs=1: 312.50000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvds vdd: 2.5v output enable polarity: oe active high temperature stability: +/- 50 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532fa000212bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532fb000112bg oscillator specification summary 4/19/2007 7:13:39 am model number: si532 (dual xo) output frequency (mhz): fs=0: 622.08000 fs=1: 644.53125 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvds vdd: 2.5v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532fb000112bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532fb000122bg oscillator specification summary 4/19/2007 7:13:12 am model number: si532 (dual xo) output frequency (mhz): fs=0: 106.25000 fs=1: 125.00000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvds vdd: 2.5v output enable polarity: oe active high temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532fb000122bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532nb000228bg oscillator specification summary 4/19/2007 7:15:32 am model number: si532 (dual xo) output frequency (mhz): fs=0: 81.920000 fs=1: 122.88000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvds vdd: 3.3v output enable polarity: oe active low temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532nb000228bg.mht
xo/vcxo part number selector help oscillator part number information part number: 532nb000228bgr oscillator specification summary 4/19/2007 7:16:08 am model number: si532 (dual xo) output frequency (mhz): fs=0: 81.920000 fs=1: 122.88000 (frequencies are sorted in ascending order, since this is a multi-frequency part number code > 000100. refer to ordering information in si532.pdf for more information.) output format: lvds vdd: 3.3v output enable polarity: oe active low temperature stability: +/- 20 ppm operating temperature range (c): -40 to +85 tape & reel option: yes datasheet: si532.pdf does this match your requirements? yes: no: initiate request go back start over pa g e 1 of 2 silicon laboratories - xo/vcxo part number selecto r 20-a pr -2007 mhtml:file://\\bnsndv31\data\ p rod\ p rod-user\user\nanda\fogc1\532nb000228bgr.mht

▲Up To Search▲

Price & Availability of 532BA000210BG

	To Download 532BA000210BG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .